how to innitiate Polytech printer 602/602s series

To start the Polytech printer 602/602s series, you can follow the steps below:

1‌.Unpack the printer‌: First, remove all tapes, protective films, and packaging materials so that the printer can work properly.

‌2.Connect the power cord and adapter‌: Connect the power cord to the printer's power interface and plug the other end of the adapter into a power outlet.

‌3.Touch the power button to turn on the printer‌: Find the power button on the printer and touch it to start the printer.

‌4.Continue the setup on the printer display‌: The animations and instructions on the printer display will guide you through all the steps required to set up the printer. The control panel buttons will only light up when available so that you can operate as needed.

Please note that these steps are based on the general operation process of general printers and assume that your printer has been properly connected to the power supply and there is no physical damage. If you encounter any problems, it is recommended to refer to the printer's user manual or contact technical support for help‌